Click image to view full size image
DESCRIPTION
The Intumescent strip is a graphite-based intumescent fire seal encapsulated in a rigid thermoplastic profile. It has been designed for use in fire resisting door assemblies to seal the gap between leaf and frame, or between separate leaves, in the event of a fire. When subjected to the heat of a fire the intumescent core material expands to fill any gap between the door leaf and frame. This forming of a robust char barrier will hold up the passage of hot gases and smoke as well as the flames.
The Intumescent strip are suitable for use on fire resisting door assemblies manufactured from timber, or timber doors with steel frames. They are unaffected by atmospheric moisture and therefore do not require any further protection.
|
Application |
Fire Resisting Timber or Steel Doorset |
|
Fire resistance period |
30 to 90 minutes |
|
Insulation/Integrity |
Integrity and insulation |
|
Test standard |
EN 1634-1:2014 +A1:2018 |
FURNACE TEMPERATURE / TIME CURVE
BENEFITS PACKAGING INFORMATION
|
Profile dimensions [mm] |
Pack contents [Pc/Ctn] |
|
10x4x2200 |
250 |
|
15x4x2200 |
175 |
|
20x4x2200 |
125 |
|
25x4x2200 |
110 |
|
30x4x2200 |
75 |
• EN 1634-1:2014 & UL 10C
• Easy to cut
• Protects against fire
• Unaffected by moisture, humidity,atmospheric pollution and other common industrial and household chemical substance.
• Supplied with a Self-adhesive backing for easy of application
FIELD OF APPLICATION
• Sutiable for latched single and double door
• Sutiable for unlacted single and double door
• Rebates in door frame or door leaf
FITTING INSTRUCTION
• Intumescent seals needs to be located centrally in either door leaf or frame.
• Rout a groove suitable for the size of intumescent seal selected. Clean the rebate to remove any dust.
• Measure and cut seal to length using a hacksaw. Remove self-adhesive backing and butt joint fit all seals to inside and outside of door frame or door, and meeting stiles of pairs of doors where applicable. Pressure must be applied to activate adhesive backing. Remove the self-adhesive backing liner from the product and push fit into the routed groove.
COLOR CHART
Intumescent strip standard range of colors are shown below:
(White, Brown, Dark Brown, Silver, Grey, Black, Red)
|
Profile dimensions [mm] |
Colors |
|
10x4x2200 |
|
|
15x4x2200 |
|
|
20x4x2200 |
|
|
25x4x2200 |
|
|
30x4x2200 |
|
We are also able to manufacture seals to any RAL colors
CHEMICAL COMPOSITION: The element rapid high-pressure forming multi-directional expandable graphite. OUTER CONTAINER: PVC-u outer casing, which has a proven performance in terms of durability, along with a high performance acrylic adhesive to aid installation.
Testing
http://www.firestopchina.com/